• GT Elastic Slurry Coating 100 is a two component latex polymerized waterproofing cementitious coating
• GT Elastic Slurry Coating 100 is formulated for effective protection for various buildings and structural concrete elements
• Suitable for protecting concrete and mortar to prevent water infiltration
• GT Elastic Slurry Coating 100 is formulated for protecting structures facing prolonged and continuous water immersion.
• Suitable for application on both the positive and negative sides of substrates exposed to water
• Suitable for waterproofing walls & floors in concrete water tanks, tunnels, basements, swimming pools, terraces, balconies & washroom
• Waterproofing on concrete, lightweight locks, pre-cast concrete
• Anti carbonation
• Two-component formulation with consistent mixing ratios
• Easy to apply by brush or thin trowel application
• Excellent adhesion
• Prevents water penetration
• Non-toxic
• Complied with American, German & Chinese Standards
• Compatible with GT Screed products & GT Render series
• American Standard: ASTM D412, ASTM E96
• German Standard: DIN 1048
• Chinese Standard: GB/T 23445 : 2009
1 Set Will Cover Approx. 19m2
|
Part A 25 KG (Dry-Mixed Powder) |
Part B 9 L (Flexible Latex Admixture) |
|
| Colour | Grey | White |
| Component | Portland cement, fine sand, filler and other chemical additives | |
| Max. aggregate size | 0.3 mm | |
| Mixing Ratio | 9 L latex admixture/25 KG bag | |
| Density | 1.6 KG/L (wet) | |
| Pot Life | Approx. 2 hours | |
| Thickness | 0.8 – 1.5 mm in 2 coats | |
| Theoretical Consumption | Approx. 15 – 21 m2/ package | |
| Solid Content | GB/T 23445 | > 75% |
| Tensile Strength | - Surface dry | < 2 hours |
| - Foot trafficable | < 4 hours | |
| Tensile Strength | GB/T 23445 | |
| - Initial strength | 1.8 N/mm2 | |
| - Tensile strength after heating (80oC for 5 hours) | 1.6 N/mm2 | |
| - Tensile strength after alkaline treatment (10% NaOH for 48 hours) | 1.5 N/mm2 | |
| - Tensile strength after water immersion | 1.5 N/mm2 | |
| ASTM D412 | ||
| Initial strength | 2.0 N/mm2 | |
| Adhesion Strength To Concrete (Under Moisture Condition) | GB/T 23445 | > 1 N/mm2 |
| Elongation At Break | ASTM D412 - Elongation | > 30% |
| Water Impermeability Pressure | GB/T 23445 | |
| - Head of water, 0.3 MPa for 30 minutes | Watertight | |
| - Head of water on the negative side | ≥ 0.8 N/mm2 | |
| Water Vapour Transmission | ASTM E96 | |
| - Front Face (Permeance) | 2.9 x 10-7g/ Pa•s•m2 | |
| - Rear Face (Permeance) | 2.1 x 10-7g/ Pa•s•m2 | |
| Water Permeability (Penetration) Test | DIN 1048 | |
| - Head of Water, 0.5MPa | Watertight |
| DATE SHEET | |
| Product Sheet |
GT Elastic Slurry Coating 100 Product SheetSend download link to: |
