• GT Colour Grout is a polymerized cementitious, low water absorption tile grout
• GT Colour Grout is formulated for tile grouting work on both interior & exterior wall and floor joints
• An extensive selection of colors is offered to coordinate with a variety of tiles
• Suitability for use in contact with portable water
•Ideal for floors and walls (joint widths of 1-5mm)
• Grouting for both internal and external floors and walls, compatible with various ceramic types (double-red, single-red, clinker, porcelain, etc.), terracotta, stone materials (natural stone, marble, granite, agglomerates, etc.), as well as glass and marble mosaic.
• For joint widths of 1-6mm
• Single-component formulation with consistent mixing ratios
• Excellent adhesion to tiles and tile adhesives
• Excellent abrasion resistance
• Minimizes shrinkage cracking
• Low water absorption
• Excellent compressive & flexural strength
• Tolerance to acidic cleansers with a pH greater than 3
• Complied with European, British, American & Chinese Standards
• Compatible with GT Tile Adhesive series products
• European Standard: EN 13888 : 2002 Class CG2WA
• British Standard: BS 5980 : 1980 Part 7. 9
• American Standard: ANSI A118.6 : 1992, USEPA method 24
• Chinese Standard: JC/T 1004 : 2017 Class CG2W
Note: Due to uncontrollable pigment fading, tarnishing or paper aging of printed materials, the colors in this colors chart may alter due to the unavoidable fading of pigments, discoloration, or aging of printed materials. There might be minor color discrepancies between this color chart and the actual product. This product is not suitable for industrial flooring where the resistance to chemicals is demanded.
注意： 所有顏色有機會受原材料、紙品的紙品材料或印刷方式影響，而導致以上顏色與實際產品顏色稍有偏差。
敬請注意。不適用於有抗化學物質要求的工業地坪縫的填充。
| Chemical Component | Portland cement, fine sand, filler and other chemical additives |
| Colour | Tailored |
| Packaging | 25 KG |
| Maximum Aggregate Size | 0.3 mm |
| Water Demand | 6.0 – 6.75 L/25 KG bag ( Approx. 24%–27%) |
| Density | 1.9 g/cm3(wet) for 26% water demand |
| Pot Life | Approx. 1.5 hours |
| Coverage | Approx. 1.5 kg/m2/mm |
| Storage Life | 12 months (Product must kept in a dry environment) |
| Adhesion To Concrete | EN 12808-2 | < 1000 mm3 |
| Compressive Strength | EN 12808-3 | |
| - After dry storage | > 15 N/mm2 | |
| - After freeze-thaw cycle | > 15 N/mm2 | |
| Flexural Strength | EN 12808-3 | |
| - After dry storage | ≥ 2.5 N/mm2 | |
| - After freeze-thaw cycle |
≥ 2.5 N/mm2 |
|
| Linear Shrinkage | ANSI A 118.6 | |
| - After 24 hours | 0.01 mm/m | |
| - After 7 days | 0.13 mm/m | |
| EN 12808-4 | ||
| - After 28 days | 2.468 mm/m | |
| Water Absorption | EN 12808-5 | |
| - After 30 minutes | 0.5g | |
| - After 240 minutes | 1.5g | |
| Water Absorption | ANSI A 118.6 | |
| - 50% R.H. to immersion | 2.5 % | |
| - Immersion to dry | 4.4 % | |
| Resistance To Mould Growth | BS 5980 | No mould growth |
| Tensile Strength |
BS 5980 (7 days normal + 7 days water immersion) BS 5980 (14 days normal) |
1629 N 2429 N |
| VOC Content | USEPA method 24 | 10 g/L |
| Suitability For Use In Contact With Portable Water | BS 6920 section 2 | |
| Odour and Flavour | Complied | |
| Appearance | Complied | |
| Growth of aquatic micro-organisms | Complied | |
| Extraction of substances that may be of concern to public health | Complied | |
| Extraction of metal | Complied |
| DATE SHEET | |
| Product Sheet |
GT Colour Grout Product SheetSend download link to: |
