• GT Tile Fix 616 is a polymerized, cementitious, water-resistant thin bed tile adhesive
• GT Tile Fix 616 is formulated for tiling work on ALC block-walls, brickworks, concrete & gypsum boards
• Suitable for bonding different types of tiles such as marble, granite, ceramic, and homogenous tiles in both interior & exterior conditions
• GT Tile Fix 616 has non slip & extended open time properties, complied with C1TE class of EN 12004
• Suitable for tiles sized up to 300 mm x 600 mm for tiling applications
• Interior & exterior wall & floor tiling
• Tiling on render or concrete
• Ensure proper priming by using GT Moisture Guard on surfaces like gypsum board, cement board, drywall, gypsum support, and anhydrite substrate before initiating the tiling process.
• Single-component formulation with consistent mixing ratios
• Excellent adhesion strength
• Thixotropic and Easy to use
• Water Resistant
• Non-Slip properties with extended open time of 30 minutes
• 10 minutes adjustment time
• Complied with European, British & Chinese Standards
• Compatible with GT Render, Tile Grout & Waterproofing series products
• European Standard: BS EN 12004-1:2017 Class C1TE
• British Standard: BS 5980: 1980 Type 1 Class AA
• Chinese Standard: JC/T 547 : 2017 Class C1TE
| Chemical Component | Portland cement, fine sand, filler and other chemical additives |
| Colour | Grey & White |
| Packaging | 25 KG |
| Maximum Aggregate Size | 1.0 mm |
| Water Demand |
Grey: 6.25 – 6.75 L/25 KG bag (Approx. 25 – 27%) White: 6.5 – 7.0 L/25 KG bag (Approx. 26 – 28%) |
| Density |
Grey: 1.61 KG/L (wet) for 26% water demand White: 1.62 KG/L (wet) for 27% water demand |
| Pot Life | Approx. 3 hours |
| Coverage | Grey : Approx. 1.15-1.28 KG/m2/mm White : Approx. 1.14-1.27KG/m2/mm |
| Storage Life | 12 months (Product must kept in a dry environment) |
| Adhesion To Concrete | EN 1348 | |
| - Initial adhesion strength | ≥ 0.5 N/mm2 | |
| - Adhesion strength after heat ageing | ≥ 0.5 N/mm2 | |
| - Adhesion strength after water immersion | ≥ 0.5 N/mm2 | |
| - Adhesion strength after freeze-thaw cycles | ≥ 0.5 N/mm2 | |
| Open time | EN 1346 | 30 minutes with ≥ 0.5 N/mm2 adhesive strength |
| Adjustment time | BS 5980 (Requirement ≥ 450 N at 10 Mins) | 1781 N at 10 Mins |
| Slip Resistance | EN 1308 | 0.2 mm |
| VOC content | USEPA Method 24 | < 10 g/L |
| DATE SHEET | |
| Product Sheet |
GT Tile Fix 616 Product SheetSend download link to: |
• GT Tile Fix 636 is a polymerized, cementitious, water-resistant thin bed tile adhesive
• GT Tile Fix 636 is formulated for tiling work on ALC block-walls, brickworks, concrete & gypsum boards
• Suitable for bonding different types of tiles such as marble, granite, ceramic, and homogenous tiles in both interior & exterior conditions
• GT Tile Fix 636 has non vertical slip & extended open time properties, complied with C2TE class of EN 12004
• Suitable for large sized tiles & stone = for tiling applications
• Interior & exterior wall & floor tiling
• Tiling on render or concrete
• Ensure proper priming by using GT Moisture Guard on surfaces like gypsum board, cement board, drywall, gypsum support, and anhydrite substrate before initiating the tiling process.
• Single-component formulation with consistent mixing ratios
• Excellent adhesion strength for exterior weathered conditions
• High flexibility to accommodate substrate movements resulting from temperature fluctuations and shrinkage
• Thixotropic consistency and Easy to use
• Water Resistant
• Non vertical slip properties with extended open time of 30 minutes
• 10 minutes adjustment time
• Complied with European, British, American & Chinese Standards
• Compatible with GT Render, Tile Grout & Waterproofing series products
• European Standard: BS EN 12004-1:2017 Class C2TE
• British Standard: BS 5980 : 1980 Type 1 Class AA
• American Standard: ASTM D3960
• Chinese Standard: JC/T 547 : 2017 Class C2TE
| Chemical Component | Portland cement, fine sand, filler and other chemical additives |
| Colour | Grey & White |
| Packaging | 40 KG |
| Maximum Aggregate Size | 0.8 mm |
| Water Demand |
Grey: 10.4 – 11.6 L/40 KG bag (Approx. 26 – 29%) White: 10.8 – 12.0 L/40 KG bag (Approx. 27 – 30%) |
| Density |
Grey: 1.53 KG/L (wet) for 27.5% water demand White: 1.57 KG/L (wet) for 28.5% water demand |
| Pot Life | Approx. 3 hours |
| Coverage |
Grey : Approx. 1.15-1.2 KG/m2/mm
White : Approx. 1.2-1.22 KG/m2/mm |
| Storage Life | 12 months (Product must kept in a dry environment) |
| Adhesion To Concrete | EN 1348 | |
| JC/T 547 | ||
| - Initial adhesion strength | 1.4 N/mm2 | |
| - Adhesion strength after heat ageing | 1.3 N/mm2 | |
| - Adhesion strength after water immersion | 1.4 N/mm2 | |
| - Adhesion strength after freeze-thaw cycles | 1.6 N/mm2 | |
| Shear Adhesion Strength | BS 5980 | 16.2 kN |
| Open Time | EN 1346 | 30 minutes with ≥ 1.4 N/mm2 adhesive strength |
| Adjustment Time | BS 5980 | 2230 N at 10 Mins |
| Slip Resistance | EN 1308 | ≤ 0.5 mm |
| VOC Content | USEPA Method 24 | < 10 g/L |
| Suitability For Use In Contact With Portable Water | BS 6920 section 2 : 2014 | |
| - Odour and Flavour | Complied | |
| - Appearance | Complied | |
| - Growth of aquatic micro-organisms | Complied | |
| - Extraction of substances that may be of concern to public health | Complied | |
| - Extraction of metal | Complied |
| DATE SHEET | |
| Product Sheet |
GT Tile Fix 656 Product SheetSend download link to: |
• GT Tile Fix 656 is a high performance, deformable polymerized, cementitious, water-resistant thin bed tile adhesive
• GT Tile Fix 656 is formulated for tiling work on ALC block-walls, brickworks, concrete & gypsum boards
• Suitable for bonding different types of tiles such as marble, granite, ceramic, and homogenous tiles in both interior & exterior conditions
• GT Tile Fix 656 has deformable, non-vertical slip & extended open time properties, complied with C2TE S1 class of EN 12004
• Suitable for large sized tiles and stone for tiling applications
• Interior & exterior wall & floor tiling
• Tiling on render or concrete
• Ensure proper priming by using GT Moisture Guard on surfaces like gypsum board, cement board, drywall, gypsum support, and anhydrite substrate before initiating the tiling process.
• Single-component formulation with consistent mixing ratios
• Deformable
• Excellent adhesion strength for exterior weathered conditions
• Extra flexibility to accommodate substrate movements resulting from temperature fluctuations and shrinkage
• High Thixotropic consistency and Easy to use
• Water Resistant
• Non-vertical slip properties with extended open time of 30 minutes
• 10 minutes adjustment time
• Complied with European, American & Chinese Standards
• Compatible with GT Render, Tile Grout & Waterproofing series products
• European Standard: BS EN 12004-1:2017 Class C2TE S1 or S2 (if incorporate GT EVA)
• American Standard: ASTM D3960
| Chemical Component | Portland cement, fine sand, filler and other chemical additives |
| Colour | Grey & White |
| Packaging | 40 KG |
| Maximum Aggregate Size | 0.8 mm |
| Water Demand |
Grey: 10.4 – 11.6 L/40 KG bag (Approx. 26 – 29%) White: 10.8 – 12.0 L/40 KG bag (Approx. 27 – 30%) |
| Density |
Grey: 1.52 KG/L (wet) for 27.5% water demand White: 1.53 KG/L (wet) for 28.5% water demand |
| Pot Life | Approx. 3 hours |
| Coverage |
Grey : Approx. 1.15-1.2 KG/m2/mm White : Approx. 1.15-1.2 KG/m2/mm |
| Storage Life | 12 months (Product must kept in a dry environment) |
| Adhesion To Concrete | EN 1348 | |
| - Initial adhesion strength | 2 N/mm2 | |
| - Adhesion strength after heat ageing | 2 N/mm2 | |
| - Adhesion strength after water immersion | 1.3 N/mm2 | |
| - Adhesion strength after freeze-thaw cycles | 1.7 N/mm2 | |
| Open Time | EN 1346 | 30 minutes with ≥ 1.3 N/mm2 adhesive strength |
| Slip Resistance | EN 1308 | 0.2 mm |
| Deformability | EN 12002 | S1 deformable |
| VOC content | USEPA Method 24 | < 10 g/L |
| DATE SHEET | |
| Product Sheet |
GT Putty Product SheetSend download link to: |
• GT ECO Fix is an environmentally friendly, high-strength, high-performance, Low cement, water-resistant, and single-component tile adhesive with reduced CO2 emissions.
• GT ECO Fix is formulated for tiling work on ALC block-walls, brickworks, concrete & gypsum boards
• Suitable for bonding different types of tiles such as marble, granite, ceramic, and homogenous tiles in both interior & exterior conditions
• GT ECO Fix has deformable, non-vertical slip & extended open time properties, complied with C2TE S1 class of EN 12004
• Suitable for large sized tiles and stone for tiling applications
• Interior & exterior wall & floor tiling
• Tiling on render or concrete
• Ensure proper priming by using GT Moisture Guard on surfaces like gypsum board, cement board, drywall, gypsum support, and anhydrite substrate before initiating the tiling process.
• Single-component formulation with consistent mixing ratios
• Deformable
• Efflorescence resistance
• Excellent adhesion strength for exterior weathered conditions
• Extra flexibility to accommodate substrate movements resulting from temperature fluctuations and shrinkage
• High Thixotropic consistency and Easy to use
• Water Resistant
• Non-vertical slip properties with extended open time of 30 minutes
• 10 minutes adjustment time
• Complied with European & Chinese Standards
• Compatible with GT Render, Tile Grout & Waterproofing series products
• European Standard: EN 12004-1 Class C2TE S1
• Chinese Standard: JC/T 547 : 2017
| Chemical Component | Green binder of industrial byproducts, non-reactive aggregate, graded sand & other chemical additives |
| Colour | Silver grey |
| Packaging | 25 KG |
| Maximum Aggregate Size | 0.8 mm |
| Water Demand | Approx. 26 – 28% (6.5-7.0L/25 KG bag) |
| Density | 1.4-1.50KG/L for 27% water demand |
| Pot Life | Approx. 55 minutes |
| Coverage | Approx. 1.18 kg/m2/mm |
| Storage Life | 9 months (Product must kept in a dry environment) |
| Adhesion to concrete | EN 1348: 2007 & JC/T547: 2017 | |
| - Initial adhesion strength | ≥ 1 N/mm2 | |
| - Adhesion strength after heat ageing | ≥ 1 N/mm2 | |
| - Adhesion strength after water immersion | ≥ 1 N/mm2 | |
| - Adhesion strength after freeze-thaw cycles | ≥ 1 N/mm2 | |
| Open time | EN 1346 |
30 minutes with ≥ 0.5 N/mm2 adhesive strength |
| Deformability | EN12002:2002 | S1 deformable |
| Adjustment time | BS 5980 | 10 minutes |
| Resistance to Efflorescence | JC/T 1024 | No efflorescence after 21 cycles |
| Slip resistance | EN 1308 | ≤ 0.5 mm |
| VOC content | USEPA Method 24 | ＜10 g /L |
| DATE SHEET | |
| Product Sheet |
GT Tile Fix 656 Product SheetSend download link to: |
| Method Statement |
GT ECO Fix Method StatementSend download link to: |
| MSDS |
GT ECO Fix MSDSSend download link to: |
